You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Maglock, Adapters and the Ultimate Hose Clamp > Ultimate Hose Clamp > UHC Base for Onefinity Elite and X50 rails
UHC Base for Onefinity Elite and X50 rails
print icon

With the introduction of the new Onefinity Elite series machines... comes new accessories.

 

One of those is the Ultimate Hose Clamp Onefinity Base and attaches to the back of XZ mounting point, and is compatible with x-50 stiffy. Untested on X35, however it is unlikely to work.

Designed to work with Arms, Drop Arms, and Attachments

 

Simply remove the screws (if present) and add it on top of Elite switch plate or without a switch plate, just install the screws. 

 

 

 

The Onefinity Base is made available for purchase and included within the maker files pack for our Ultimate Hose Clamp.

 

This base is very similar to the Spindle bases which do not require the use of an extension arm in order to properly align the end-attachment to your machine configuration.

Feedback
0 out of 0 found this helpful

scroll to top icon