You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Upgrading Shapeoko Pro w/Z-Plus to HDZ
print icon

Have you just upgraded your Shapeoko Pro with its stock Z-Plus carriage to a brand new HDZ carriage?  

 

Here's a list of parts you'll need to continue to use your z-independent dust boot:

 

Required:

 

Note:  You will need to swap the tracks on the end of your support arms.  Instead of the horizontal tracks sweeping forward, they will now sweep backwards.

 

Installation instructions can be found here:  support.pwncnc.com/kb/article/54-bracketing-for-shapeoko-pro-w-hdz/

Feedback
0 out of 0 found this helpful

scroll to top icon