You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Spindle System, ATC and Related Information > What do I need to upgrade my Black Box 1F to an Elite as it regards Spindles?
What do I need to upgrade my Black Box 1F to an Elite as it regards Spindles?
print icon

Taking advantage of the 1F upgrade path for those connecting via the Modbus connection... Well, you're in the right place to find out what you need. 

 

The top has V0, and V1

The Middle is V2 and V3

The bottom block is V4

 

 

 

VFD UpgradeSpindle Cable & GX12-6 Pin to GX12-6 Pin

 

 

VFD Enclosure Upgrade & GX12-6 Pin to GX12-6 Pin

 

GX12-6 Pin to GX12-6 Pin connector cable and make the following changes in your VFD:

P0.0.03 = 1

P0.0.04 = 3

 

 

DIY VFD Upgrade is not available

 

We cannot tell you if you have V3 or V4 based on your order date as we would only be guessing based on memory. 

 

V5's started shipping 1 November 2023, if you have a V5 the solution is the same as a V4, control cable and the above listed programming changes.
You'll know you have a V5 with black aluminum top, bottom, front, back panels and a "Run" port on the left.

 

Contact us at [email protected] if you have questions.

 

 

 

Feedback
0 out of 0 found this helpful

scroll to top icon