You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Tube Bundle for New Carve
print icon

All tube bundles are made of 6 components. 

  1. The Boot (V2 or V3)
  2. PwnCNC Extension Adapters - A simple screw-together 90 or 45deg adapter.
  3. The Tube - See-through vertical tube to reposition the hose intake at the top-rear of your X/Z Carriage.
  4. Z-Independent Bracket systems - Customized to fit a variety of machines, this bracketing system mounts onto your machine and provides the z-independent boot a vertical track for mounting onto.
  5. Ultimate Hose Clamps - Highly modular hose mounting system that has a variety of attachments to the machine, reaching out to hold the hose or in this case our Tube.
  6. Maglock Round Adapter (instructions included here)

 

Here are pictures of how your New Carve Tube Bundle is assembled:

Overall of how it'll look when done.

         

Assembly of the Stepper Base, Arm, and Tube Clamp

 

 

These screws attach the whole assembly to your Nema Stepper motor

Assembly of the tube and extension adapters.

*Your configuration may differ based on machine considerations. 

 

 

 

 

 

Feedback
0 out of 0 found this helpful

Attachments

v3.pdf v2.pdf
scroll to top icon