You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Other Products > Onefinity Foot Pads
Onefinity Foot Pads
print icon

Our Onefinity Foot Pads are designed to raise the entire machine by elevating the Y Feet. These are not designed to raise the X-Axis as they are sold as a unit of 4. 

To install these, you will need to unscrew your current feet, lift up that corner and place them underneath, and reinstall screws, using longer screws if needed. 

These are not compatible with the Foreman's Y-50 Rails and only the 35mm rails. 

 

 

 

Feedback
0 out of 0 found this helpful

scroll to top icon