You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
MagLock Round Adapter Assembly
print icon

 

 

Your package should include a MagLock Ring with embedded magnets and a Round adapter.

Both in the size you purchased... either 2.5" or 4".

 

   

 

MagLock Rings are held in place by super glue. We've done tons of testing and this seems to be the simplest solution.

Apply a generous amount of superglue onto the inside of the MagLock Ring.

Slide the ring onto the round adapter.

Allow the glue to fully dry before using.

Feedback
0 out of 1 found this helpful

scroll to top icon