You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Controller Inlet
print icon

The controller inlet cable is designed to bring our vfd's control cable into a controller's enclosure.  It has a GX12 6-pin panel connector on one side, 18" 20awg wires and ferrules on the other plugging into the actual controller.

 

although 6-pins, only 5 will need to be soldered.

 

pin 1 = black = Ground

pin 2 = red = PWM

pin 3 = yellow = Forward/CW

pin 4 = white = Digital Common

pin 5 = green = Reverse/CCW

pin 6 = unused

 

Feedback
0 out of 0 found this helpful

scroll to top icon