You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
MagLock Converter
print icon

 

The Maglock Converter is a Female PwnCNC Maglock Adapter and will connect to any of our PwnCNC boot adapters. 

We also have male converters available here for hooking up to your dust boot directly

This is a two-piece system that involves the Magring and the female converter. 

We've done tons of testing and this seems to be the simplest solution. 

 

Apply a generous amount of superglue onto the inside of the MagLock Ring, and slide the ring onto the converter.

Allow the glue to fully dry before using. 

 

An example application:

 

Feedback
0 out of 0 found this helpful

scroll to top icon