You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Bracketing System for Makers
print icon

The makers pack for bracketing systems is delivered in 2 parts. There is the generic pack that contains all the universal screws and nuts that are required to assemble your bracketing system.

The second part is for your specific machine and what additional screws would be required to finish building. 

 

The generic pack contains:

(2) steel nut plate for the back of the track bracket.  

(4) 6x4mm n52 magnets 

(2) M5x20 socket screws 

(2) M4x50 Socket screws 

(2) M4x45 socket screws 

(2) M3x10 socket screws 

(2) M5 Locking Nuts 

(2) M4 Nuts 


 

Feedback
0 out of 0 found this helpful

scroll to top icon