You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
How to make V3
print icon

For the makers out there, this is what required to make the V3 boot yourself and below is how you would assemble it.

Dust Boot (v3) - Brush

Dust Boot v3 - Acrylic

Dust Boot v3 for Makers (Files, Makers Pack, or Both Selectable from dropdown)

 

What you'll need to print: 

./boot/boot.stl

./boot adapter/adapter-suckit.stl

./face/face.stl

./wing.stl (x2)

 

Optional:

./magnet orientation tool/orientator.stl

./wedges/Body174.stl

./wedges/body181.stl

 

 

The Body requires (8) short m3 heat inserts, (2) tall m3 heat inserts, (4) Magnets.

 

 

 

Wings require 2 magnets each

 

The Face requires (4) magnets inserted opposite the body, (2) tall m3 heat inserts and (2) pins

 

Now over to our V3 Assembly instructions

Feedback
0 out of 0 found this helpful

scroll to top icon