You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
MTC Button Handle Assembly
print icon

The ATC System comes with a Manual Tool Change Button and a Yellow Handle

 

Along with the handle are (4) M3x10 socket screws, and assembly is straight forward. 

 

 

Slide the switch assembly into the female handle assembly (with the threaded inserts). It should be a snug fit as tolerances are tight, and you may need to losen or remove the screw on the button itself all together. 

 

 

Then "snap" the other side into place, and install the screws. 

 

​​​​​​​

Feedback
0 out of 0 found this helpful

scroll to top icon