You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Cable Joints
print icon

The Cable Joints were designed for our ATC system, however they can also be utilized for a traditional water-cooled spindle system. 

 

Our Samurai inspired cable organizer has 6 available areas for cabling, and the cable is designated specifically for it. 

 

Our ATC System will come with a (4) pack of these little cable organizers. Unfortunately, they don't work on the motor side of the H20 and Sensor Cable connector, but after the connector they work great. 

 

In our own testing, over a distance, they were best placed between 12-18". Further spacing can work dependent on the situation, but after 18" or so it the organization that it was meant to create was lost. 

 

 

 

Feedback
0 out of 0 found this helpful

scroll to top icon