You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Tall
print icon

The Tall Racks are best used with a Z dependent boot either along the X Axis, or with proper spacing along the Y axis, or even a combination of both. The high profile of the Racks make these an impractical use with Z - Independent boots since the clearance needed would need to be so high. If intending to use a Z Independent boot, the tall rack may not be the the rack you want to use, perhaps the short, flush or QCW. 

 

Feedback
0 out of 0 found this helpful

Attachments

Tall_Rack.pdf
scroll to top icon