You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Masso Accessories and Information > Inlet Panel Index (GX12-3)
Inlet Panel Index (GX12-3)
print icon

Articles using the GX12-3 Pin Connector:

Spindle Chiller Alarm Wire

 

 

                 

 

 

First remove the back cover, then remove your desired locations punch out

 

 

Remove the nut of the GX-12 Connector, and thread the connector from the outside with the nylon washer on the outside of the connector serving as an electrical barrier.

Thread the nut from the inside and tighten it down. Then route the wires into the slot. 

Pro tip: If routing multiple wires at the same time, group and label them meaningfully so you know what they are. 

Feedback
0 out of 1 found this helpful

scroll to top icon