You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Bracketing for Shapeoko 4
print icon

 

 

 

 

 

 

 

 

2 Inventory

 

You'll find several bags within the Bracketing System bag. Locate the bag of plastic parts and the screws bag for the Shapeoko 4.

  • (8) M5x20mm Button
  • (2) M3x10mm Button
  • (4) M4x12mm Socket
  • (8) M5 Nylon Locking Nuts

Note: If there are extra hardware in your bag, consider theme extra. The above hardware is all that will be required.

Also note that some of the plastic parts have one or more heat inserts already pressed into the part. These are not removable.

Feedback
0 out of 0 found this helpful

scroll to top icon