You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Bracketing for X-Carve
print icon

 

 

 

 

 

2 Inventory

You'll find several bags within the Bracketing System bag. Locate the bag of plastic parts and the screws bag for the Upgrade X-Carve.

  • (4) M5x35mm Button
  • (2) M5x14mm Socket
  • (8) M5 Nylon Locking Nuts

Note: If there are extra hardware in your bag, consider theme extra. The above hardware is all that will be required.

Feedback
0 out of 0 found this helpful

scroll to top icon