Here is an overview of the bagged parts included with your Tube-Bundle.  Later in this article we'll break each baggy down.

In general bracketing will require assembly onto your machine.  See the following:

Shapeoko 4's with HDZ Upgrade:  https://support.pwncnc.com/kb/article/52-bracketing-for-shapeoko-4-w-hdz/

Shapeoko Pro's with HDZ Upgrade:  https://support.pwncnc.com/kb/article/54-bracketing-for-shapeoko-pro-w-hdz/

 

---

 

v3 Dust Boot

Note your boot will need assembly.  Instructions found here.

 

Bracketing Plastics for Shapeoko 4 & Pro with upgraded HDZ

  

 

Bracketing Screws also for Shapeoko 4 & Pro with upgraded HDZ

 

Aluminum Brackets

 

Thumb Screws

 

Bracketing Arms

 

Ultimate Hose Clamp with Stepper Base, XL Arm, and Tube Attachment

 

 

Extension Adapter with both 45deg and 90deg elbows

 

The Tube & Round Adapter

Note that you'll need to super glue the adapter on one end of the tube, and one of the two included MagRings to the other.  
The second MagRing will be glued onto the MagRound adapter.